Black Horse Spitfire 2000mm (78.7″) Wingspan – ARF

Spitfire 2000mm (78.7″) Wingspan from Black Horse – Balsa Wood ARF – BHSF000

The Supermarine Spitfire is a British single-seat fighter aircraft used by the Royal Air Force and other Allied countries before, during, and after World War II. Many variants of the Spitfire were built, using several wing configurations, and it was produced in greater numbers than any other British aircraft. It was also the only British fighter produced continuously throughout the war. The Spitfire continues to be popular among enthusiasts; nearly 60 remain airworthy, and many more are static exhibits in aviation museums throughout the world.

The model is scaled to approximately 1:5 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 30-35cc displacement.

Visit the Official Black Horse Spitfire 2000mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

• High level of prefabrication right out of the box
• Lightweight, strong, laser cut balsa and plywood construction
• Panel lines and details printed directly onto the pre-applied, high quality covering
• Aerofoiled tail surfaces
• Recessed hinges on all control surfaces
• Pre-drilled hinge mounting holes
• Heavy-duty pin hinges on all control surfaces
  
• Large easy access fuel tank/battery/servo access hatches with sprung loaded latches
• Painted and detailed cockpit, pilot and interior included
• Fiberglass control horns with ball link connector
• comprehensive control and fitting accessories included
• Two-piece, plug-in wings simplify transportation and assembly
• Fiberglass cowl and glass reinforced landing gear covers/pants
• Mounts for both electric and gas power options included

Includes:

• Black Horse Spitfire 2000mm (78.7″) Wingspan – ARF
• Electric retractable landing gear and shock absorbing struts

Requires (Electric):

• 7 Channel radio – select a minimum 7 channel radio from our Radio Collection
• 7 Channel receiver – select a minimum 7 channel receiver from our Receiver Collection
• 2300-3300 Watt Brushless Outrunner Motor – we recommend the Admiral GP26 6330-245Kv Brushless Motor
• 85-120 Amp Brushless ESC – we recommend ZTW Gecko 120A ESC OPTO High Voltage Brushless ESC
• 8-18 Amp UBEC – we recommend ZTW 18A BEC / UBEC
• 8x high torque servos – we recommend D-645MW (Note: these must be run at a minimum of 6V to generate enough torque. Customers will need a 9th servo for throttle if using a gas motor.)
• For 10S setup TWO 5 Cell 18.5V 4000 mAh LiPo Batteries with EC5 connector in series – we recommend TWO Admiral Pro 4000mAh 5S 18.5V 60C LiPo Battery with EC5 Connector
• 2 to 1 EC5 series adapter – we recommend Admiral EC5 2 to 1 Series Adapter
• Electric propeller – we recommend the APC 17×10 Thin Electric Propeller
• 6 Cell compatible battery charger – select a minimum 6 cell (6S) charger from our Charger Collection

Requires (Gas):

• Engine: 30-35cc 2-stroke (NGH GT35 recommended). 38-42cc 4-stroke (NGH GF38 recommended)
• Gas Propeller: (coming soon for 2 Stroke and 4 Stroke)