Black Horse DHC-2 Turbo Beaver 2250mm (88.5″) Wingspan – ARF

DHC-2 Turbo Beaver 2250mm (88.5″) Wingspan from Black Horse – Balsa Wood ARF – BHBV000

The DHC Beaver was introduced in 1947 by DeHavilland as a single engine, high wing monoplane featuring stresses skin, monocoque construction. By the end of production in 1967, some 1600 aircraft had been produced. The late version presented here is a DHC 2T Turbo Beaver and is a development of the original piston-powered plane. The Beaver has gained a well-deserved reputation as the “workhorse of the north”.

The model is scaled to approximately 1:6.7 and attention was paid to a true-to-original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 20-35cc displacement.

Visit the Official Black Horse DHC-2 Turbo Beaver 2250mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

• High level of prefabrication right out of the box
• Lightweight and strong, laser cut balsa and plywood construction
• Finished in high quality Oracover covering
• Aerofoil section tail surfaces
• Large, scale, pre-hinged fuel tank/battery/servo access hatches with sprung loaded latches
• Painted and detailed cockpit, pilot and interior included
• Fiberglass control horns and clevises
• comprehensive control and fitting accessories included
• Two-part bolt on wing for ease of transport, assembly and storage
• Fiberglass cowl and landing gear covers
• Mounts for both electric and gas power options included
• Fully illustrated instruction manual included and also available for download (see tab above)

Includes:

• Black Horse DHC-2 Turbo Beaver 2250mm (88.5″) Wingspan – ARF

Requires (Electric):

• 6 Channel radio – select a minimum 6 channel radio from our Radio Collection
• 6 Channel receiver – select a minimum 6 channel receiver from our Receiver Collection
• 1500 – 2000 Watt Brushless Outrunner Motor – we recommend the Admiral GP20 6320-295Kv Brushless Motor
• 100-120 Amp Brushless ESC – we recommend ZTW Gecko 120A ESC OPTO High Voltage Brushless ESC
• 8-18 Amp UBEC – we recommend ZTW 18A BEC / UBEC
• Electric propeller – we recommend the APC 18×12 Thin Electric Propeller
• 7x 45g standard servos – we recommend HS-625MG
• 6 Cell 22.2V 5000 mAh LiPo Battery with EC5 connector – we recommend Admiral 5000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector
• 6 Cell compatible battery charger – select a minimum 6 cell (6S) charger from our Charger Collection

Requires (Gas):

• Engine: 20 – 35cc 2 or 4-stroke. GT25 2-stroke/ GF-30 4-stroke recommended
• Gas Propeller: 15×8 – 16×10 (2 Stroke) 15×10 – 17×10 (4 Stroke)